Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';

contract TokenVesting is Ownable {
    // The vesting schedule is time-based (i.e. using block timestamps as opposed to e.g. block numbers), and is
    // therefore sensitive to timestamp manipulation (which is something miners can do, to a certain degree). Therefore,
    // it is recommended to avoid using short time durations (less than a minute). Typical vesting schemes, with a
    // cliff period of a year and a duration of four years, are safe to use.
    // solhint-disable not-rely-on-time

    using SafeERC20 for IERC20;

    event TokensReleased(address token, uint256 amount);
    event TokenVestingRevoked(address token);

    // Beneficiary of tokens after they are released
    address private immutable _beneficiary;

    // Durations and timestamps are expressed in UNIX time, the same units as block.timestamp.
    uint256 private immutable _start;
    uint256 private immutable _cliff;
    uint256 private immutable _duration;
    uint256 private immutable _end;

    bool private immutable _revocable;

    mapping(address => uint256) private _released;
    mapping(address => bool) private _revoked;

    /**
     * @dev Creates a vesting contract that vests its balance of any ERC20 token to the
     * beneficiary, gradually in a linear fashion until start + duration. By then all
     * of the balance will have vested.
     * @param beneficiary_ address of the beneficiary to whom vested tokens are transferred
     * @param start_ the time (as Unix time) at which point vesting starts
     * @param cliff_ duration in seconds of the cliff in which tokens will begin to vest
     * @param duration_ duration in seconds of the period in which the tokens will vest
     * @param revocable_ whether the vesting is revocable or not
     */
    constructor(
        address beneficiary_,
        uint256 start_,
        uint256 cliff_,
        uint256 duration_,
        bool revocable_
    ) {
        require(beneficiary_ != address(0), 'beneficiary is the zero address');
        require(cliff_ <= duration_, 'cliff is longer than duration');
        require(duration_ > 0, 'duration is 0');
        require(start_ + duration_ > block.timestamp, 'final time is before now');

        _beneficiary = beneficiary_;
        _revocable = revocable_;
        _duration = duration_;
        _cliff = start_ + cliff_;
        _end = start_ + duration_;
        _start = start_;
    }

    /**
     * @notice Transfers vested tokens to beneficiary.
     * @param token ERC20 token which is being vested
     */
    function release(IERC20 token) public {
        uint256 unreleased = releasableAmount(token);

        require(unreleased > 0, 'no tokens are due');

        _released[address(token)] = _released[address(token)] + unreleased;

        token.safeTransfer(_beneficiary, unreleased);

        emit TokensReleased(address(token), unreleased);
    }

    /**
     * @notice Allows the owner to revoke the vesting. Tokens already vested
     * remain in the contract, the rest are returned to the owner.
     * @param token ERC20 token which is being vested
     */
    function revoke(IERC20 token) external onlyOwner {
        require(_revocable, 'cannot revoke');
        require(!_revoked[address(token)], 'token already revoked');

        uint256 balance = token.balanceOf(address(this));

        uint256 unreleased = releasableAmount(token);
        uint256 refund = balance - unreleased;

        _revoked[address(token)] = true;

        token.safeTransfer(owner(), refund);

        emit TokenVestingRevoked(address(token));
    }

    /**
     * @return the beneficiary of the tokens.
     */
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /**
     * @return the start time of the token vesting.
     */
    function start() public view returns (uint256) {
        return _start;
    }

    /**
     * @return the end time of the token vesting.
     */
    function end() public view returns (uint256) {
        return _end;
    }

    /**
     * @return the cliff time of the token vesting.
     */
    function cliff() public view returns (uint256) {
        return _cliff;
    }

    /**
     * @return the duration of the token vesting.
     */
    function duration() public view returns (uint256) {
        return _duration;
    }

    /**
     * @return true if the vesting is revocable.
     */
    function revocable() public view returns (bool) {
        return _revocable;
    }

    /**
     * @return the amount of the token released.
     */
    function released(address token) public view returns (uint256) {
        return _released[token];
    }

    /**
     * @return true if the token is revoked.
     */
    function revoked(address token) public view returns (bool) {
        return _revoked[token];
    }

    /**
     * @notice Calculates the amount that has already vested but hasn't been released yet.
     * @param token ERC20 token which is being vested
     */
    function releasableAmount(IERC20 token) public view returns (uint256) {
        return vestedAmount(token) - _released[address(token)];
    }

    /**
     * @notice Calculates the amount that has already vested.
     * @dev Vesting accumulation begins on the cliff.
     * @param token ERC20 token which is being vested
     */
    function vestedAmount(IERC20 token) public view returns (uint256) {
        uint256 currentBalance = token.balanceOf(address(this));
        uint256 totalBalance = currentBalance + _released[address(token)];

        if (block.timestamp < _cliff) {
            return 0;
        } else if (block.timestamp >= _end || _revoked[address(token)]) {
            return totalBalance;
        } else {
            // note releasable amount starts vesting on the cliff and not on the start
            return ((totalBalance * (block.timestamp - _cliff)) / (_duration - (_cliff - _start)));
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"beneficiary_","type":"address"},{"internalType":"uint256","name":"start_","type":"uint256"},{"internalType":"uint256","name":"cliff_","type":"uint256"},{"internalType":"uint256","name":"duration_","type":"uint256"},{"internalType":"bool","name":"revocable_","type":"bool"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"TokenVestingRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensReleased","type":"event"},{"inputs":[],"name":"beneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cliff","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"duration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"end","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"releasableAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"release","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"released","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"revocable","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"revoke","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"revoked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"start","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"vestedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000a73eab567b78ef9c8311f93507085844e76c39770000000000000000000000000000000000000000000000000000000061b735c00000000000000000000000000000000000000000000000000000000000784ce000000000000000000000000000000000000000000000000000000000034a1a200000000000000000000000000000000000000000000000000000000000000001

-----Decoded View---------------
Arg [0] : beneficiary_ (address): 0xa73eAb567B78Ef9c8311F93507085844e76c3977
Arg [1] : start_ (uint256): 1639396800
Arg [2] : cliff_ (uint256): 7884000
Arg [3] : duration_ (uint256): 55188000
Arg [4] : revocable_ (bool): True

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000a73eab567b78ef9c8311f93507085844e76c3977
Arg [1] : 0000000000000000000000000000000000000000000000000000000061b735c0
Arg [2] : 0000000000000000000000000000000000000000000000000000000000784ce0
Arg [3] : 00000000000000000000000000000000000000000000000000000000034a1a20
Arg [4] : 0000000000000000000000000000000000000000000000000000000000000001